GE Healthcare · MRExcite2248356
No Clock Signal Due To an open primary winding on the low-voltage AC line clock transformer
Symptom
Can Not Scan
Error message
2248356 SSI Watchdog Timeout. An SSI Was Not Detected in the Timeout Period. See Long Description Wed Jul 7 09:33:17 2004 Error: 2248356 Host: GEMRI_1Process: NSP File: SCP:sct_wdog_exp Line: 852 SSI Watchdog Timeout. An SSI was not detected in the timeout period. The PSD or AGP might not be running. It may be necessary to perform a TPS reset. If TPS Reset doesn't help then AC 60Hz clock may be missing. Extended Error: Check the 60Hz clock signal from PDM to STIF Board in CAM chassis. Run CAM Data Acquisition SRF Diagnostics.
Applies to
- Models
- Excite
- Product
- Excite Includes Excite 1 and Excite 2, 10.0, 11.0 and 11.1 Software.
- Software
- 11.0 Only for 1.5T Excite product. 12.0 is Excite HD and 14.0 is Excite HDx. Note, 3T Excite goes with software G3, not 11.0 or 11.1.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.