GE Healthcare · MRExcite22480101913212248102101512248239
PSD download fails. 3T Excite G3.
Symptom
Protocol PSD Download Fails. Protocol PSD Download Fails
Error message
2248010 A/D Offsets is out of Valid Range See Long Description 2248010 File: DRF Line: 350 Diagnostic: RRF Calib Iteration: 1 of 1 Action: 1 Task ID: 0xa55688 Time: 191321 Object: APS A/D Offsets is out of valid range The calculated value is 1, valid range is 127,-128 (rcvr=0) Suspect analog receiver problem, please run Diagnostics! 2248102 Received invalid cm packet 10151, scan state = 6 Software Error. Error: 2248102 Host: amr12 Process: diagCoord File: processPkt Line: 896 Diagnostic: RRF Calib Iteration: 1 of 1 Action: 1 Task ID: 0xc2a4f8 Time: 191321 Object: APS Received invalid cm packet 10151, scan state = 6 Software error, please perform a TPS Reset. 2248239 ADC Offsets Calibration Validation Failed. The Acquired ADC Offsets are out of Tolerance for the Following Receivers. ADC offsets calibration validation failed. The acquired ADC offsets are out of tolerance for the following receivers. Rx=2 Tol = +/-128 A TPS reset may be necessary.->
Applies to
- Models
- Excite
- Product
- 3T Excite G3 Software ONLY
- Software
- G3 For 3T Excite only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.