GE Healthcare · MRExciteSigna22448492244871
Gradient OverTemperature or OverCurrent or OverVoltage Faults due to Control Board.
Symptom
Will Not Scan with Gradient Errors.
Error message
2244849 The GP is reporting a Gradient Amplifier Y Axis OverVoltage Fault See Long Description Extended Error : If this fault is intermittent, first rule out PSD-related problems by changing the FOV or oblique angle. If faults continue to occur, and if there is no Overvoltage fault reported on the SGA Power Supply, then replace the Gradient Amplifier. 2244871 The GP reported multiple Gradient Amplifier % Axis OverVoltage Faults. See Long Description Extended Error : If an Overvoltage fault is not also reported on the SGA Power Supply, replace the Gradient Amplifier. Else replace the SGA Power Supply. TPS reset is required to recover from this fault.
Applies to
- Models
- Excite, Signa
- Product
- Excite HD For 12.0 1.5T Systems only.
- Software
- 12.0 Excite HD and 3T Excite HD products only
- Component
- 2396050-2 HFA CONTROL BOARD ASSEMBLY
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.