GE Healthcare · MR2248650
Intermittent Warnings of high Patient Comfort Temperature Readings due to Gradient Chiller.
Symptom
Intermittent Warnings of high Patient Comfort Temperature Readings Intermittent Warnings of high Patient Comfort Temperature Readings.
Error message
2248650 The patient comfort level is warmer than normal. The patient may be uncomfortable. Further increases in the temperature will inhibit scanning. 2248650 b4a NSP SCP:BoreTempSriHWO 987 The patient comfort level is warmer than normal. The patient may be uncomfortable. Further increases in the temperature will inhibit scanning. Verify: 1. Patient fan is ON. 2. Room temperature is normal. 3. Air flow through the bore is unobstructed.
Applies to
- Product
- Open Speed with EXCITE For HFO4 and HFO5 only
- Software
- OPENMR4-HFO4 Software version for HFO4 system, which is OpenSpeed with Excite Technology
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Patient comfort sensor trip Due to Gradient Cooling Problem.
- Patient Comfort Blower Will Not Start Due to Blower Assembly.
- Patient comfort sensor trip Due to Gradient Cooling Problem
- Will Not Scan With Patient Comfort Sensor Trip Due to Scan room temperature was warmer than normal.
- Patient comfort sensor trip Due to Gradient Cooling Problem.
- Intermittent warnings of high patient comfort temperature readings Due to Low Coolant Level.