GE Healthcare · MROptima2273003
Coil id not recognized intermittently due to Coil Cable.
Symptom
Coil ID not recognized intermittently. Only one coil is affected.
Error message
2273003 Coil validation error. An incorrect CRC was detected in the coil ID data from the coil. The coil is programmed incorrectly. See Long Desc. 2273003 Coil validation error. An incorrect CRC was detected in the coil ID data from the coil. The coil is programmed incorrectly. Connector: %b Extended Error: If this happens whenever the coil is plugged in, this is most likely a bad coil. If not, this could indicate a bad connection at the coil interface, a bad coil, bad cables to the RF Hub RFCB, or a bad RFCB. Try connecting another coil. Run the Coil ID Diagnostic or Coil Datapath Diagnostic to troubleshoot cabling issues and to isolate the coil interface from the coil.
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Component
- 5415540 1.5T CARDIAC POSTERIOR CABLE 5415540 FRU, 1.5T CARDIAC POSTERIOR CABLE
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.