GE Healthcare · MRSigna
MR010024 PDS - Prescan Noise Alert - Continuous Dead Signal Detected due to Defective Preamp.MR010024 PDS - Prescan Nois…
MR010024 PDS - Prescan Noise Alert - Continuous Dead Signal Detected due to Defective Preamp.MR010024 PDS - Prescan Noise Alert - Continuous Dead Signal Detected.3.0T Signa HDxT 15.0 3.0T preamp board…
Symptom
MR010024 PDS - Prescan Noise Alert - Continuous Dead Signal Detected. Continuous dead signal detected during use of identified coil. NOTE: The OnWatch Advanced ToolKit detected this problem. This issue is only applicable when detected in this way, and should not be reused in Knowledge objects for normal reactive service.
Error message
MR010024 PDS - Prescan Noise Alert - Continuous Dead Signal Detected. Select this Error only when handling MR010024 PDS Issue Concept. NOTE: The OnWatch Advanced ToolKit detected this problem. This issue is only applicable when detected in this way, and should not be reused in Knowledge objects for normal reactive service.
Applies to
- Models
- Signa
- Product
- 3.0T Signa HDxT For 3.0T Signa HDxT systems with 15.0 software only. For 3.0T Signa HDxT systems with 15.0 software only.
- Software
- 15.0 For Product Signa HDxT and HDi only. -- NOT to be used with HDe. -- For Product Signa HDxT and HDi only. -- NOT to be used with HDe. --
- Component
- 3T Multicoil I/F Assembly Preamp – 2323890-5 This is a single preamp for the 3T Multicoil Assembly located in the LPCA. This part should be ordered if you are able to isolate to a problem preamp. 3T Multicoil I/F Assembly Preamp – 2323890-5 This is a single preamp for the 3T Multicoil Assembly located in the LPCA. This part should be ordered if you are able to isolate to a problem preamp. 3T Multicoil I/F Assembly Preamp – 2323890-5
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.