GE Healthcare · MRSigna2241520
MiniGRAM fails to go Ready due to MiniGRAM Control Board.
Symptom
Will Not Scan with Gradient Errors.
2241538 The % axis miniGRAM failed to go to Ready when commanded. Error: 2241538 Host: lx-mr Process: NSP File: HPC PORT ID:GAP/GIP/GP Line: 733 The Z axis miniGRAM failed to go to Ready when commanded. Check the cable between the GIP & miniGRAM, miniGRAM Ctrl Bd, GIP, and the LED status on the Z Axis miniGRAM.
Error message
2241520 The GIP reported a Z Axis Current Distortion Fault. Fri Sep 10 10:58:56 2004 Error: 2241520 Host: wb001 Process: NSP File: HPC_PORT_ID:GAP/GIP/GP Line: 2232 The GIP reported a Z Axis Current Distortion Fault. Another fault reported in the log could be the cause of this fault. Possible causes: GRAM Tuning, miniGRAM, component
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Component
- 2172312 Minigram Control Board
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.