GE Healthcare · MRSigna2225024
After Replacing CPD Board System cannot Scan with Power Monitor Firmware Errors
Symptom
After Replacing CPD Board System cannot Scan with Power Monitor Firmware Errors
Error message
2225024 The SPI has reported the power monitor firmware version is not compatible "The SPI has reported the power monitor firmware version is not compatible. (.5T vs 1.0T vs 1.5T) Check for correct PowerMonType in MRconfig.cfg file, then verify correct power monitor firmware."
Applies to
- Models
- Signa
- Product
- Signa LX Signa LX Product can be used with 8.x and 9.x systems.
- Software
- 9.1 For Signa LX product only
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.