GE Healthcare · MR
DailyQA failed due to coldhead component failure SpecialtyMR 1.5T MSK AA5000 SpecialtyMR 3.53
Symptom
Daily QA Failed The Daily QA should be run every day using the 180mm coil with the Daily QA 1 liter bottle.
Error message
The Daily QA test failed. Please check for proper phantom positioning and proper system setup and run again. If the problem cannot be corrected, contact Service and report the error. Further clinical scanning is not recommended until the error condition is corrected.
Applies to
- Product
- SpecialtyMR 1.5T Extreme MSK AA5000 For use only with 2.51 or 3.53 Software versions
- Software
- SpecialtyMR 3.53 Use with 1.5T Extreme MSK AA5000 and Optima MR430s SpecialtyMR products
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.