Will Not Scan with Gradient Errors.

Symptom

Error message

2238492 The MIF is reporting a long overload on the Y axis LOW 8645 Power Module. The LED on the 8645 for this fault should be lit. If the LED is not lit, check power and cable connections. To clear the fault, power cycle the Y axis LOW 8645 Power Module. 2238492 The MIF is reporting a long overload on the Y axis LOW 8645 Power Module. The LED on the 8645 for this fault should be lit. If the LED is not lit, check power and cable connections. To clear the fault, power cycle the Y axis LOW 8645 Power Module.

2238414 Y Axis Gradient Overload Occurred. The Y axis LOW 8645 Power Module has reported an overload. Error 2238414 : Y Axis Gradient Overload Occurred.The Y axis LOW 8645 Power Module has reported an overload. An overload is the result of the power module output voltage not following the input command.

2238562 The ASM is reporting that the PPBM voltage has exceeded the allowed range on the LOW 8645 Power Module. Error 2238562 : ASM VCC_L Error. The ASM is reporting that the PPBM voltage has exceeded the allowed range on the LOW 8645 Power Module. Possible causes: PPBM, main board, output shelf, or ASM. Low: %6dv High: %6dv Value: %6dv axis: %c Standby/Ready State: %c

Applies to

Models

Signa

Product

Signa LX Signa LX Product can be used with 8.x and 9.x systems.

Software

9.1 For Signa LX product only

Component

46-328206p22 CROWN Poly Phase Buck Module 46-328206p24 CROWN Main Control Board

Area

MR

Related GE Healthcare MR issues

• CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
• CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
• CWA How to Change Exam Number from Remote Tools.
• Known Software issue with 15M4B coding error.
• Unable to Send Images to the PACS Due to PACS is down.
• U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.