GE Healthcare · CTLightSpeed
LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
Symptom
Unable to attach and label MOD disks
Error message
Current sd00:00: sense key Not Ready - Additional sense indicates Medium not present found in /var/log/messages kernel: Device not ready. Make sure there is a disc in the drive. kernel: sdd : READ CAPACITY failed. kernel: sdd : status = 1, message = 00, host = 0, driver = 28 kernel: Current sd00:00: sense key Not Ready kernel: Additional sense indicates Medium not present kernel: sdd : block size assumed to be 512 bytes, disk size 1GB. kernel: sdd: I/O error: dev 08:30, sector 0 kernel: unable to read partition table tail -100 /var/log/messages kernel: Device not ready. Make sure there is a disc in the drive. kernel: sdd : READ CAPACITY failed. kernel: sdd : status = 1, message = 00, host = 0, driver = 28 kernel: Current sd00:00: sense key Not Ready kernel: Additional sense indicates Medium not present kernel: sdd : block size assumed to be 512 bytes, disk size 1GB. kernel: sdd: I/O error: dev 08:30, sector 0 kernel: unable to read partition table
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2 This is HP CPU host running LINUX with Pegasus IG. 308L.8_H3.3M4 ~ 4 or 8 slice MDAS. ~ Could be an Ultra, Plus or QXi system. Must run swokinstall -p to verify. ~ See Long description for details . LightSpeed 3.X MDAS4 Gantry and GOC2 Gantry - 2281177-2, DAS - 2272768, Console – 2341104-2, Table - 2276776, PDU - 2269902 Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required