GE Healthcare · MROptima
ICN Fails to Configure Due to Sun ICN VRE.
Symptom
ICN VRE configuration fails
Error message
ERROR DHCP address requests failed.Only received 0 of 1 DHCP requests after OS install. Error found in /usr/local/bin/install/log/VRE_Install.log during Sun ICN VRE configuration.ERROR DHCP address requests failed.Only received 0 of 1 DHCP requests after OS install. Please check ethernet cables, reseat connections and retry VRE configuration
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Component
- 5337894 Image Compute Node - DV 16CH GEN 3 5337894 Image Compute Node - DV 16CH GEN 3
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.