ID183357 RF Amplifier Peak RF Device Current Overload Fault Intermittently Aborts Scans Only on Medium to Large Lumbar P…
ID183357 RF Amplifier Peak RF Device Current Overload Fault Intermittently Aborts Scans Only on Medium to Large Lumbar Patients Using High TG due to Body Hybrid Splitter.
Symptom
RF Amplifier Peak RF Device Current Overload Fault Intermittently Aborts Scans Only on Medium to Large Lumbar Patients Using High TG. See Long Description Scans intermittently abort only on medium to large patients when scanning lumbar with high TGs. Failure occurs 2-3 times per week. Errors are logged on failure as shown below. 2254367 "RF Amplifier Peak RF Device Current Overload Fault. The RF Amplifier detected a peak current overload condition in one or more RF devices. Upper spec: %d A. ->" 2254055 "Recovery in progress, see log."
Error message
2254055 Recovery in progress, see log 2254367 RF Amplifier Peak RF Device Current Overload Fault. The RF Amplifier detected a peak current overload condition in one or more RF devices. See Long Description Upper spec: %d A. -> Extended Error: Verify proper PSD is used. Check center frequency setting in Manual Prescan; this fault could result if the frequency is off by a large amount. RF Amplifier may be operating out of specification. If fault persists, replace the RF Amplifier
Applies to
- Models
- Excite
- Product
- Excite HDe. For Hino HDe 14.0 and HDe 15.0 Software Systems only
- Software
- HDe 15.0 For Hino Excite HDe 15.0 systems only.
- Component
- 2274266 Hybrid Splitter 2274266 Hybrid Splitter 2274266 Hybrid Splitter
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.