GE Healthcare · MR
Vessel pressure is low due to a magnet quench.lcc_hmi2 alarm I2 HePressure Low.Perform Quench Recovery and submit a Quen…
Vessel pressure is low due to a magnet quench.lcc_hmi2 alarm I2 HePressure Low.Perform Quench Recovery and submit a Quench Report-wqr.Magnet LCC_HM
Symptom
lcc_hmi2 alarm I2 HePressure Low lcc_hmi2 alarm I2 HePressure Low, the Helium Vessel Pressure is lower than the low limit alarm settings on the Magnet Monitor 3.
Error message
lcc_hmi2 alarm I2 HePressure Low lcc_hmi2 alarm I2 HePressure Low, the Helium Vessel Pressure is lower than the low limit alarm settings on the Magnet Monitor 3.
Applies to
- Product
- Magnet LCC_HM Magnet LCC_HM is a LCC short bore 1.5 T magnet. The foot print of the magnet is different than a normal LCC magnet. User should reference the installation manual "Direction 5500108, 1.5T & 1.0T LCC and MR450 Magnet Delivery & Installation. LCC_HM magnet profile must be selected in the MM3 with 1.62 or greater software.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.