GE Healthcare · MR2224580
Auto prescan fails body and multicoil scans with signal too small error 2224580 due to no output from body port of 25KW…
Auto prescan fails body and multicoil scans with signal too small error 2224580 due to no output from body port of 25KW RF amp.
Symptom
No output on body transmit Scans fails autoprescan with low signal error No output on body transmit Scans fails autoprescan with low signal error.
Error message
2224580 Auto Prescan failed. Signal was too small to process - use Manual Prescan 2224580 Host: hopgemr1a Process: NSP File: APS:aps_cf Line: 11 Auto Prescan failed. Signal was too small to process - use Manual Prescan
Applies to
- Product
- 3T Eclipse For E2 software
- Software
- E2 3T Eclipse
- Component
- 2278810-4 3T 25KW RF AMPLIFIER KIT MKS ARX-X433 rev D 01480017ZZ RF POWER AMP model: 50-S26A-128 part#: 2278810-4
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- Auto Prescan Fails Due To Center Frequency Off By 2000 hz.
- Loss of Signal or Shading in Spine Images due to the Coil.
- Auto Prescan Fails Due To Center Frequency Off By 2000 hz.
- Signal Too Small to Process Due to Twin Gradient Switch Box.
- Banana plug on the Head T/R switch has bent/broken fingers causing coil to disconnect.
- Auto Prescan Fails Due To Center Frequency Off By 2000 hz.