GE Healthcare · X-ray R&FRevolution
494F System communication error, retry/reset or call service
Symptom
494F System communication error, retry/reset or call service 494F System communication error, retry/reset or call service.Wallstand Display module no display.
Error message
494F System communication error, retry/reset or call service See long description Error 494F MESSAGES Console Error Message: System communication error, retry/reset or call service Debug Mode Error Message: CANOPEN WS Display Board Failure MODULE Positioner DESCRIPTION The positioner (Master CAN node) cannot communicate with the wall stand display module. RECOMMENDED ACTIONS 1. Check CANOPEN cable connections and terminations. 2. Check wall stand power supply connections and fuses. 3. Check wall stand display connections. 4. Replace wall stand display module. 5. Replace wall stand electronics module.
Applies to
- Models
- Revolution
- Product
- Revolution XRd
- Software
- 28.2 Version
- Component
- Wallstand (Revolution XR/d - Gipeto)
- Area
- X-ray R&F
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray R&F issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray R&F issues
- ADx-E Advantx-E console displayed a 6C00 Error (Digital Imaging Subsystem error - Error status received in IDC Prep Reply) when the first exposure of detector bad pixel calibration was attempted; cali…
- Revolution XR/d After a Load From Cold, the AWS exhibits strange operation and the SUIF does not have any Positioner Configuration and Calibration selections due to the use of the incorrect Jumpstart…
- Revolution XRd2X Worklist query on "All Systems in this Modality" does not retrieve anything after FMI 10791A is completed due to the default query set to DX.
- Revolution XR/d error 4280 when trying to make exposure to table or wallstand detector
- Revolution XRd 2X The HP Workstation reboots itself.
- Def8000, Def5000, Revolution XRd and XRD2X Latent lead marker image burned into the detector.