GE Healthcare · CTHiSpeed183158
Scan Hardware Error with HVDC Bus voltage not sensed
HiSpeed CTi 6.X with Octane and HSA Gantry
Symptom
Scan Hardware Error with HVDC Bus voltage not sensed
Error message
Error: 183158 HVDC Bus voltage not sensed in 2 seconds See LD for complete error Wed Sep 20 11:01:10 2006 Error: 183158 Suite: SMCT Host: OBC Process: Generator File: gen_rotor.c 1.40 Method: No Method Function: SYSTEM MONITORING : 550V Monitor Scan: 0/0/1 Type: Static Line: 530 Exception Level: Pri/Most Severe Time: 11:01:10:450 Log Series: 25 HVDC Bus voltage not sensed in 2 seconds. Pilot relays on I/O board closed, pilot relay in PDU energized.
Applies to
- Models
- HiSpeed
- Product
- HiSpeed CTi 6.X HiSpeed CTi 6.X with Octane and HSA Gantry HiSpeed CTi 6.X with Octane and HSA Gantry Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare CT issues
- Scanner Hardware Stopped Scan
- Patient Schedule fails to display some patients when updated.
- Ring artifact on axial images with no errors in logs.
- Scanner Hardware Stopped Scan.
- Both gantry controls are flashing and scanning hardware reset failed with SGI Indigo Console, HiSpeed Advantage Gantry
- Center Smudge Artifact.