Infinia default Home Positions for "L" mode and "H" mode intermittently changes for no reason For example.
Infinia default Home Positions for "L" mode and "H" mode intermittently changes for no reason
Symptom
Infinia default Home Positions for "L" mode and "H" mode intermittently changes for no reason For example. "L" mode home position will rotate the gantry to 270 degrees instead of 0 or the "H" mode home position will extend the cradle fully instead and leaving it retracted. The "L" mode or "H" mode Home Position default settings would spontaniusly change to different position settings values It was found the "L" Mode gantry settings were changing everytime the customer used several different Acquisition Protocols. If the static acquisition protocol called for the L gantry configuration, the L Mode settings would be updated to the settings used for that static scan.
Applies to
- Models
- Infinia
- Product
- Infinia HE4 Infinia II Hawkeye 4 & Infinia II GP (Infinia running Windows XP software)
- Component
- *Software Software Software
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- After software upgrade FMI40786, the Infinia application does not automatically start on boot up
- I need the product data sheet on catalog E4500AK x-ray in use warning light interface control panel for Infinia
- Infinia Does not recognize collimator is mounted to detector, not reading collimator ID correctly.
- Where do I obtain the Non-Linear Correction tables for a VG/Infinia Hawkeye system if can't find the CD that came with the DAS assembly?
- Hawkeye CT scan Ring (Circular) artifacts in X-ray images appearing in the same radius in all of the images.