GE Healthcare · CTLightSpeed1820037089968182026
LightSpeed 4.X - GRE
Symptom
Scanner Hardware Stopped Scan. Scanner Hardware Stopped Scan
Error message
Error: 182003 HW/SW Error: Did not receive message from STC See long description Sat Mar 13 09:41:41 2010 Error: 182003 Host: STC Process: Local Exc Handler File: exl_verify_wdog.c Line: 134 Function: No System Function Reported Scan: 6789/2/0 Type: None/Unknown Exception Level: Secondary Time: 7089968 Log Series: 0 Local controller Notify Verification TIMEOUT for uuid 220. HW/SW Error: Did not receive message from STC. Will need a Hardware Reset. Error: 182026 Did not receive LAN Watchdog message from STC See long description for full error Mon Mar 23 08:32:18 2009 Error: 182026 Host: ETC Process: Local Exc Handler File: exl_lan_in_mail.c Line: 210 Function: No System Function Reported Scan: 0/0/0 Type: None/Unknown Exception Level: Pri/Most Severe Time: 3447 Log Series: 3 LAN Watchdog TIMEOUT. HW/SW Error: Did not receive LAN Watchdog message from STC. Putting Hardware Into Safe State. (Current State:3447)
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 4.X - GRE See Long Description for detailed information - H2_P_M16 Product Name: LightSpeed 4.X with GRE Product Photographs GE HEALTHCARE Method of remote or software identification - See attachment below for a complete list of software commands and typical results 1. check_config 2 . swhwinfo “swhwinfo” will have the following switches: · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) -h or –help = Outputs complete details about all the available switches associated with swhwinfo swhwinfo –c –m –o -da List of Supported Console types: GOC3 (GRE) GOC4 (GRE) List of software the product can run: 07MW11.10 SP2.0, SP3.0, SP3.1 FAQ's Table weight limit - 180 kg (400 lbs) normal operation - 205 kg (450 lbs) maximum allowed with decreased accuracy Tube type - D3186T D3186T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required