GE Healthcare · CTLightSpeed
LightSpeed 5.X (80/100kW)
Symptom
Remote In Room Monitor has no display. See long desctiption for more details. Remote In Room Monitor has no display. Both console monitors are working normally, only the remote in room monior has no display with power on.
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 5.X (80/100kW) LightSpeed 5.X (80/100kW) ~ Use with both MDAS and GDAS ~ GRE Console HP_H_G16 HP_H_M16 HP_O_M16 LightSpeed 5.X (100kW) GDAS16 with GRE Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Component
- 5169069 19 INCHES COLOR MONITOR LCD 1990SXi. See long description for details Part #: 5169069 Part Type: GP CONSUMABLE - RETURNABLE Part Weight: 2.43 LBR Repairable: No Returnable: Yes Hazardous Material: N Description: OEM 19 INCHES COLOR MONITOR LCD 1990SXi - SILVER FRU: Yes Status: Orderable Comments: Check graphics board output connector: if 13W3M you need to order 13W3M/HD15 adaptor: 2261178. Per eNPI Project 015197, 212008898, 11/10/06. This monitor should not be ordered for use on 11.X, 10.X, 9.X, or 8.X Signa MR systems until further notice. Required monitor gamma table is not yet available for these systems. Instead order 5117545. (212002950 - 4/25/2007)
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required