Infinia Gantry IPS is not powering on, all indicator lights are off except the Detector’s High Voltage LED The…
Infinia Gantry IPS is not powering on, all indicator lights are off except the Detector’s High Voltage LED
Symptom
Infinia Gantry IPS is not powering on, all indicator lights are off except the Detector’s High Voltage LED The Infinia's system indicator lights are dark. Even after power on, only the Detector’s HV indicator LED is lit. In fact, when the system is powered on the Main Switch and the Standby Button are not lit. Even the green ON button doesn't respond. All of the indicator lights are dark, only the Detector’s HV indicator lights are red with the H1&H2 High Voltage LED's being illuminated. The detector is the only portion of the system that appears to have power.
Applies to
- Models
- Infinia
- Product
- Infinia HE4 Infinia II Hawkeye 4 & Infinia II GP (Infinia running Windows XP software) Infinia I Infinia I Acquisition System Infinia II Infinia II Acquisition System
- Component
- *IPS IPS IPS
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- After software upgrade FMI40786, the Infinia application does not automatically start on boot up
- I need the product data sheet on catalog E4500AK x-ray in use warning light interface control panel for Infinia
- Infinia Does not recognize collimator is mounted to detector, not reading collimator ID correctly.
- Where do I obtain the Non-Linear Correction tables for a VG/Infinia Hawkeye system if can't find the CD that came with the DAS assembly?
- Hawkeye CT scan Ring (Circular) artifacts in X-ray images appearing in the same radius in all of the images.