LightSpeed 7.x (VCT, VCT Select, Pro32)

Symptom

Error message

Error: 260134717 Elevation touch switch1 (tape switches on underside of top front cover) isn''t present. Open Long Description to see error example. Tue Sep 13 13:27:51 2005 Error: 260134717 Host: tgp Process: tgp_subsys File: gtcb_emc_hardware.cxx Line: 753 Tue Sep 13 13:27:50 2005 Host : Table Sub-System Ermes # : 260134717 Exception Class : Secondary Severity : Pri/Soft File : gtcb_emc_hardware.cxx Line# : 753 Function : No System Function Reported Scan Type : None/Unknown Scan: 2081/2/0 Elevation touch switch1 (tape switches on underside of top front cover) isn''t present. Position is 840961 um from the table base.

Error: 260134729 Elevation cannot move because any of the touch switches are already contacted or disconnected. See long description for full error Error: 260134729 Host: tgp Process: tgp_subsys File: gtcb_emc_profile.cxx Line: 166 Tue Jun 20 14:59:35 2006 Host : Table Sub-System Ermes # : 260134729 Exception Class : Secondary Severity : Pri/Soft File : gtcb_emc_profile.cxx Line# : 166 Function : No System Function Reported Scan Type : None/Unknown Scan: 3261/4/0 Type of the touch switches will be shown above log message. - Error: 260134714

Applies to

Models

LightSpeed, VCT

Product

LightSpeed 7.x (VCT, VCT Select, Pro32) V40_H_V64_G_GTM V40_H_V64_G_GTL V40_H_V32_G_GTM V40_H_V32_G_GTL V40_H_H64_G_GTM V40_H_H64_G_GTL V40_H_HS64_G_G Product Name: LightSpeed 7.x (VCT, VCT Select, Pro32) Product photographs Method of remote or software identification - See attachment for a complete list of software commands and typical results. check_config swhwinfo “swhwinfo” will have the following new switches available with the VCT M4 and PF 1.5 M3 software release (software release deploying this “swhwinfo” capability is “06MW03.?”): · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) · -h or –help = Outputs complete details about all the available switches associated with swhwinfo · swhwinfo –c –m –o -da List of Supported Console Types GOC5 Will have a VDARC and VIG GOC6 Will have a VDIG List of softwares the product can run 09MW08.10 09MW08.11 08MW33.2 07MW18.4 06MW03.4 05MW31.6 FAQ's Table weight limit - Up to 500 lb. (227 kg) with ± .25 mm positional accuracy Tube type - D3194T D3193T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system. Done acording to template

Component

5133732 Tape Switch (265mm) used as long tape switch 1 and IMS tape switch 4 See Long Discription Part #: 5133732 TAPE SWITCH 3 Positioning GT Part #: 5133732 Part Type: GP CONSUMABLES Part Weight: 0.00 LBR Repairable: No Returnable: No Hazardous Material: N Description: TAPE SWITCH 3 Positioning GT FRU: Yes Status: Orderable ICV/Transfer Price: 34.78 USD /Each List Price: 193.89 USD /EACH Location Tape Switch Part Number Description Switch Description in gesyslog TOP COVER FRONT ASSY 5133731 TAPE SWITCH 2 (185mm) Elevation touch switch1 (tape switches on underside of top front cover) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch1 (tape switches on underside of top front cover) IMS LEFT SIDE COVER 5133730 TAPE SWITCH 1 (100mm) IMS tape switch OUT (front) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch4 (tape sw on underside of IMS side cover) IMS REAR UPPER COVER 5164938 TAPE SWITCH 4 (208mm) IMS Tape Switch IN� (rear) IMS RIGHT SIDE COVER 5133730 TAPE SWITCH 1 (100mm) IMS tape switch OUT (front) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch4 (tape sw on underside of IMS side cover) 5133731 : Tape Switch (185mm) used as the short Tape Switch 1 see long description for details 5133731 TAPE SWITCH 2 (185mm) used as the short touch switch for T/S 1 on the Global Table Part #: 5133731 Part Type: GP CONSUMABLES Part Weight: 0.00 LBR Repairable: No Returnable: No Hazardous Material: N Description: TAPE SWITCH 2 Positioning GT FRU: Yes Status: Orderable Location Tape Switch Part Number Description Switch Description in gesyslog TOP COVER FRONT ASSY 5133731 TAPE SWITCH 2 (185mm) Elevation touch switch1 (tape switches on underside of top front cover) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch1 (tape switches on underside of top front cover) IMS LEFT SIDE COVER 5133730 TAPE SWITCH 1 (100mm) IMS tape switch OUT (front) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch4 (tape sw on underside of IMS side cover) IMS REAR UPPER COVER 5164938 TAPE SWITCH 4 (208mm) IMS Tape Switch IN� (rear) IMS RIGHT SIDE COVER 5133730 TAPE SWITCH 1 (100mm) IMS tape switch OUT (front) 5133732 TAPE SWITCH 3 (265mm) Elevation touch switch4 (tape sw on underside of IMS side cover)

Area

CT

Related GE Healthcare CT issues

• LightSpeed 4.X - GRE
• Phantom Holder is bent, broken, cracked, or damaged
• LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
• LightSpeed 5.X (60kW)
• LightSpeed 5.X (60kW)
• Keyboard is not typing the characters correctly