GE Healthcare · CTLightSpeed
LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2
Symptom
Applications software fails to startup. After Linux boot up, output on both monitor screens stop with a login prompt displayed in top left corner of screen. Applications software fails to startup. After Linux boot up completes, the output on both monitor screens stop with a login prompt displayed in top left corner of screen. If you login and attempt to startup applications software it will fail to startup and reply back with: /usr/X11R6/bin/xterm Xt error: Can''t open display: :0.0
Error message
Error: Can''t open display: :0.0 (message seen on screen, not in an error log) From screen capture while booting the system. {ctuser@mhjx-gelsctb}2 st Waiting for kernel to clean up sockets... Error: Can't open display: :0.0 Sockets cleaned up. /usr/X11R6/bin/xterm Xt error: Can't open display: :0.0 cat: startMon.oc.status: No such file or directory *********** starting the HiSpeed CT/i system *********** *********** CT LightSpeed processes starting *********** {ctuser@mhjx-gelsctb}3 /usr/X11R6/bin/xterm Xt error: Can't open display: :0.0Applies to
- Models
- LightSpeed
- Product
- LightSpeed 3.X (Ultra, Plus, QX/i) - GOC2 This is HP CPU host running LINUX with Pegasus IG. 308L.8_H3.3M4 ~ 4 or 8 slice MDAS. ~ Could be an Ultra, Plus or QXi system. Must run swokinstall -p to verify. ~ See Long description for details . LightSpeed 3.X MDAS4 Gantry and GOC2 Gantry - 2281177-2, DAS - 2272768, Console – 2341104-2, Table - 2276776, PDU - 2269902 Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Software
- 308L.8_H3.3M4 for LightSpeed 3.X (Ultra, Plus, QX/I with Console GOC2 (w/Linux PC) Assembly (2315653) or Xtream (GRE) Console - showprods returns 308L.8_H3.3M4 for LightSpeed 3.X (Ultra, Plus, QX/I with Console GOC2 (w/Linux PC) Assembly (2315653) or Xtream (GRE) Console - showprods returns 308L.8_H3.3M4 for LightSpeed 3.X (Ultra, Plus, QX/I with Console GOC2 (w/Linux PC) Assembly (2315653) or Xtream (GRE) Console
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required