GE Healthcare · Nuclear MedicineInfiniaMillennium
VG error #144 when table starts to move up or down, and then the gantry reports error #167 max dac after Greset
Symptom
VG error #144 when table starts to move up or down, and then the gantry reports error #167 max dac after Greset
Error message
Error #144 (Error 144) Velocity test fail axis = 9 (Table Up / Down) Error #167 (Error 167) MAXIMUM DAC COMMAND. AXIS = 9 HEIGHT (Table Up / Down)) Error #167 (Error 167) MAXIMUM DAC COMMAND. AXIS = 9 HEIGHT (Table Up / Down)
Applies to
- Models
- Infinia, Millennium
- Product
- VGH VG and VG Hawkey and Varicam
- Component
- *Patient Table *Patient Table *Patient Table
- Area
- Nuclear Medicine
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare Nuclear Medicine issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare Nuclear Medicine issues
- How do I capture and print COR and Camera Uniformity (CUA) result screens on Genieacq, then send to a processing station for ACR
- Collision and E-stop lights are red on the back of the gantry and no movement with Hand Held Controller (HHC) or the genieacq.
- Service Note 43783_1 Feb/08 Infinia/Ventri/Xeleris 1.1 & 2
- Need part numbers for the Millennium MG/MC table E-Stop
- How do I Delete a file on Genieacq that the system thinks is still acquiring
- After software upgrade FMI40786, the Infinia application does not automatically start on boot up