GE Healthcare · CTLightSpeed
LightSpeed 5.X (80/100kW)
Symptom
Gantry fails to reset properly via the console, but resets ok with gantry re-power. see long description for more detail. Gantry fails to reset properly upon reboot, or via scan hardware reset, the message "scanning hardware reset successful" is returned very quickly, but the Ganty display is blank, and all table/gantry functions are disabled, but if the gantry is repowered via the service switches or at the PDU, the reset works properly, and the system operates normally.
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 5.X (80/100kW) LightSpeed 5.X (80/100kW) ~ Use with both MDAS and GDAS ~ GRE Console HP_H_G16 HP_H_M16 HP_O_M16 LightSpeed 5.X (100kW) GDAS16 with GRE Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required