GE Healthcare · CTLightSpeed2600078501993326000784850092
LightSpeed 4.X - GRE
Symptom
Scanner Hardware Stopped Scan. Scanner Hardware Stopped Scan
Error message
Error: 260007850 DHCB has CLEARED the following error: DHCB Sensor and/or Control Abort error. Error: 260007850 Host: DAS Process: DCB Firmware File: detmgr.c Line: 1125 Function: DATA ACQUISITION : Scan Data Acquisition Scan: 19933/2/0 Type: None/Unknown Exception Level: Pri/Soft Time: 16:50:48:060 Log Series: 505 DHCB has CLEARED the following error: DHCB Sensor and/or Control Ab Error: 260007850 Host: DAS Process: DCB Firmware File: detmgr.c Line: 1125 Function: DATA ACQUISITION : Scan Data Acquisition Scan: 19933/2/0 Type: None/Unknown Exception Level: Pri/Soft Time: 16:50:48:060 Log Series: 505 DHCB has CLEARED the following error: DHCB Sensor and/or Control Abort error. Error: 260007848 DHCB Sensor and/or Control Abort error See long description for full error Host: DAS Process: DCB Firmware File: detmgr.c Line: 1090 Function: DATA ACQUISITION : Scan Data Acquisition Scan: 50092/1/1 Type: Axial Exception Level: Sec/Soft Time: 09:22:54:900 Log Series: 43 DHCB has issued an abort condition - DHCB Error is as follows: DHCB Sensor and/or Control Abort error
Applies to
- Models
- LightSpeed
- Product
- LightSpeed 4.X - GRE See Long Description for detailed information - H2_P_M16 Product Name: LightSpeed 4.X with GRE Product Photographs GE HEALTHCARE Method of remote or software identification - See attachment below for a complete list of software commands and typical results 1. check_config 2 . swhwinfo “swhwinfo” will have the following switches: · -c or -classc = Outputs the Class C version, if installed, on the system · -m or -classm = Outputs the Class M version, if installed, on the system · -o or -os = Outputs the Operating System version installed on the system · -da or -date = Outputs the date and time the software was installed on the system (LFC) -h or –help = Outputs complete details about all the available switches associated with swhwinfo swhwinfo –c –m –o -da List of Supported Console types: GOC3 (GRE) GOC4 (GRE) List of software the product can run: 07MW11.10 SP2.0, SP3.0, SP3.1 FAQ's Table weight limit - 180 kg (400 lbs) normal operation - 205 kg (450 lbs) maximum allowed with decreased accuracy Tube type - D3186T D3186T(green) Current production - M4 Options - TBD Links to the updated Product Service Manuals, FMIs, Service Notes, Option Manuals and Operator Documents can be found online at the attached sites. Always use the most appropriate documentation for your system.
- Area
- CT
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare CT issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required