Lithoskop, tower
23 parts in the Siemens Healthineers Lithoskop, tower assembly — OEM material numbers, descriptions and compatibility.
| Pos | Material No. | Description | Qty | FRU |
|---|---|---|---|---|
| 1 | 08356409 | System - Control HW (DXP II) | 1 | — |
| 101 | 08356664 | Installation set DXP2 | 1 | — |
| 2 | 07730968 | Distributor board D1 | 1 | — |
| |$4 | 07751030 | Fuse SMD 750mA T 125V | 1 | — |
| |$5 | 03086881 | Fuse SMD 500mA T 125V | 1 | — |
| 3 | 08604402 | Energy charge unit U11 | 1 | — |
| 4 | 11105327 | Hose set, Lithoskop | 1 | — |
| 5 | 08610292 | Interface and motor drive D4 | 1 | — |
| 6 | 08610102 | High voltage cable_U11 | 1 | — |
| 7 | 05531053 | CONTROL BOARD D3 | 1 | — |
| |$11 | 04657649 | Fuse 5x20 3A15 T 250V | 5 | — |
| |$12 | 04681458 | Fuse 5x20 630mA T 250V um | 1 | — |
| |$13 | 03146073 | Lithium Battery 3,6V 1,75AH 15*50 | 1 | — |
| 7 | 10142950 | D3 Litho module (SiLiCon) | 1 | — |
| |$15 | 03073848 | Fuse SMD 3A T 125V | 1 | — |
| |$16 | 03079720 | Fuse SMD 5A T 125V | 1 | — |
| |$17 | 03082146 | Lithium Battery CR2032 3V 220mAh | 1 | — |
| 71 | 08356987 | SD Card Install Lithoskop D3 | 1 | — |
| 8 | 05531723 | D3-ULTRA SOUND ADDITION | 1 | — |
| 9 | 07064132 | FAN 24VDC-4,3W-67cbm/h-Q80x32 | 1 | — |
| 10 | 08356060 | Adapter kit DXP | 10 | — |
| 11 | 07733082 | FAN 24VDC-3,5W-160cbm/h-Q120x38 | 1 | — |
| 12 | 03134368 | Buzzer B/CP28 24V DAUER/UNTERBR.TON | 1 | — |
Working on this equipment?
The part number above is free. A FSELIB subscription adds what you need to actually do the job on Lithoskop, tower:
- Exploded-view diagrams with clickable hotspots — find the part on the drawing instead of guessing.
- Service manuals for the system this part belongs to — removal, installation and calibration procedures.
- Error codes with meaning, severity and the subsystem that reports them.