Control Unit M1
31 parts in the Siemens Healthineers Control Unit M1 assembly — OEM material numbers, descriptions and compatibility.
| Pos | Material No. | Description | Qty | FRU |
|---|---|---|---|---|
| 1 | 08673530 | FREQ. INVERTER CDB32.004 1,7kVA =D= | 1 | — |
| 2 | 08673548 | FREQ. INVERTER CDF30.008 24-48V =D= | 1 | — |
| 4 | 03082146 | Lithium Battery CR2032 3V 220mAh | 1 | — |
| 5 | 10046154 | Compact Flash TT04 | 1 | — |
| 6 | 08673647 | AC-DC VEGA450 V405VHC | 1 | — |
| 7 | 10046153 | Braking Resistor 200Ohm 35W | 1 | — |
| 8 | 10046171 | Kit Reset Switch | 1 | — |
| 9 | 07064504 | FAN 24V- 1,4W 35CBM/H_Q60x25 =D= | 1 | — |
| 10 | 07064512 | FAN 24V- 1,1W 29CBM/H_Q60x15 | 1 | — |
| 11 | 08632874 | Cable harness M1 | 1 | — |
| 12 | 07748366 | SCHUETZ 24V 1NC 9A 400V =D= | 1 | — |
| 13 | 08674785 | CONTACT 220VDC 3S 460VAC 9A 1HS =D= | 1 | — |
| 14 | 03067949 | SCHUETZ 24VDC 3S 9A 460VAC =D= | 1 | — |
| 15 | 03074705 | IF.SUP.DIOD.COMPL DIODENKOMBINATIO =D= | 1 | — |
| 16 | 03074721 | CONT ADD-ON PART HILFSCHALTERBLOCK =D= | 1 | — |
| 20 | 08673787 | Clamp UKK5 m. LED gn =D= | 1 | — |
| 21 | 08672987 | MCB 2A 440VAC 1pol.Car.C | 1 | — |
| 22 | 08674173 | MCB 3A 440VAC 1pol.Car.C | 1 | — |
| 23 | 10546820 | MCB 4A 400VAC 1pol.Car.C | 1 | — |
| 24 | 08674165 | MCB 2A 440VAC 1pol.Car.A | 1 | — |
| 27 | 08674777 | Relay,AC 115V 2U 8A 250VAC HS | 1 | — |
| 28 | 08674629 | Relay DC 24V 3U 5A 230VAC | 1 | — |
| 50 | 08674603 | Holder BUEGEL F.MT3230 | 1 | — |
| 52 | 08674611 | Adapter SOCKEL F.MT3230 | 1 | — |
| 29 | 08674793 | COUPLER 24VDC 60VDC 1,5A =D= | 1 | — |
| 30 | 03074838 | AC-DC 230VAC OUT 24V 10A 240W =D= | 1 | — |
| 31 | 03085149 | Aux.contactor 24V 4NO 20A 400V | 1 | — |
| 35 | 04691382 | RECTIFIER 1PH GBPC 400V 35A 29x29x8 | 1 | — |
| 38 | 10494839 | Assembly PCB certificated | 1 | — |
| 39 | 10494853 | Kit Assembly PCB with Cover CU | 1 | — |
| |$32 | 10046148 | SW-CD for service VD00C | 1 | — |
Working on this equipment?
The part number above is free. A FSELIB subscription adds what you need to actually do the job on Control Unit M1:
- Exploded-view diagrams with clickable hotspots — find the part on the drawing instead of guessing.
- Service manuals for the system this part belongs to — removal, installation and calibration procedures.
- Error codes with meaning, severity and the subsystem that reports them.