Gantry
80 parts in the Siemens Healthineers Gantry assembly — OEM material numbers, descriptions and compatibility.
| Pos | Material No. | Description | Qty | FRU |
|---|---|---|---|---|
| 1 | 08423472 | POWER SUPPLY (MAINS UNIT) - | 1 | — |
| 10 | 08423506 | fuse 10a/250v 6.3x32 mm | 2 | — |
| 11 | 08423480 | fuse little 6.25a/250v | 2 | — |
| 11 | 08423498 | fuse 12a/250v 6.3x32mm | 2 | — |
| 323 | 10521123 | Kit: Safety board replacement-c.cam | 1 | — |
| 352 | 10275566 | Safety bd w/Integrated run-away ckt | 1 | — |
| 324 | 10275553 | RUNAWAY ADAPTER PCB-C.CAM | 1 | — |
| 327 | 10275558 | Belt for Arm-drive encoder - c.cam | 1 | — |
| 328 | 10275559 | Belt for horizontal drive encoder-c | 1 | — |
| 21 | 08423530 | TWO AXES MOTOR CONTROLER | 2 | — |
| 22 | 08423548 | ROTATE/ARM MOTOR AMPLIFIER- | 2 | — |
| 22 | 11518373 | ROTATE # ARM AMPLIFIER C.CAM | 1 | — |
| 23 | 08423555 | X MOTOR AMPLIFIER - DDD P/N | 1 | — |
| |$14 | 10755304 | c.cam Hor/Chair Amplifier | 1 | — |
| |$15 | 10755308 | c.cam Amplifier Cable | 1 | — |
| |$16 | 10755300 | c.cam Hor/Chair Amplifier Kit | 1 | — |
| 24 | 08423563 | CHAIR TILT MOTOR AMPLIFIER - | 1 | — |
| 25 | 08423696 | DC 55V FILTER UNIT - DDD P/N | 1 | — |
| 26 | 08423704 | DC 180V FILTER UNIT - DDD P/N | 2 | — |
| 27 | 08423712 | canbus terminator | 1 | — |
| 30 | 08423720 | rotate amp control cable | 1 | — |
| 31 | 08423738 | arm amp control cable | 1 | — |
| 32 | 08423795 | copley amp control cable | 2 | — |
| 33 | 08423803 | canbus cable | 1 | — |
| 34 | 08423811 | long io cable | 2 | — |
| 35 | 08423829 | short io cable | 2 | — |
| 36 | 08423928 | 24 v estop cable | 1 | — |
| 45 | 08423514 | ACTUATOR POWER SUPPLY - DDD | 1 | — |
| 46 | 08423647 | X MOTOR - DDD P/N 9CSY1047-A | 1 | — |
| 47 | 08423654 | X-DRIVE ENCODER VIRGO - | 1 | — |
| 48 | 08423886 | quadbox 4 way iec | 1 | — |
| 50 | 10412599 | 3ower Supply&cord f/Dell laptops - | 1 | — |
| 50 | 10412600 | Power Supply&cord f/IBM R40/R50/R51 | 1 | — |
| 50 | 10412601 | Power Supply&cord f/IBM Lenovo R60- | 1 | — |
| 51 | 08423688 | rear panel | 1 | — |
| 348 | 10607355 | TIE BAR FRONT/REAR F. C.CAM | 1 | — |
| 349 | 10607356 | TIE BAR MIDDLE F. C.CAM | 1 | — |
| 350 | 10607357 | SCREWS F. TIE BAR F. C.CAM | 1 | — |
| 55 | 08423571 | ROTATE/ARM MOTOR - DDD P/N | 2 | — |
| 56 | 08423605 | ARM HDD RESOLVER CABLE - | 1 | — |
| 57 | 08423613 | ARM HDD MOTOR CABLE - DDD P/N | 1 | — |
| 58 | 08423639 | ARM ROTATE ENCODER VIRGO - | 1 | — |
| 59 | 08423852 | gantry e stop | 1 | — |
| 66 | 08423589 | DETECTOR HDD RESOLVER CABLE - | 1 | — |
| 67 | 08423597 | DETECTOR HDD MOTOR CABLE - | 1 | — |
| 68 | 08423621 | DETECTOR ROTATE ENCODER VIRGO | 1 | — |
| 75 | 08423670 | CHAIR ACTUATOR - DDD P/N | 1 | — |
| 325 | 08419256 | CHAIR BASE (c.cam) | 1 | — |
| 326 | 01233035 | SCREW ISO 4762-M10x40-12.9 | 1 | — |
| 80 | 08423969 | chair limit cable | 2 | — |
| 85 | 08423662 | CHAIR TILT MOTOR - DDD P/N | 1 | — |
| 90 | 08423985 | tilt control buttons | 1 | — |
| 95 | 08423936 | pc estop box | 1 | — |
| 301 | 08423746 | rotate/arm enc power cable | 1 | — |
| 304 | 08423779 | incremental encoder cable | 2 | — |
| 305 | 08423787 | chair tilt and x motor cable | 1 | — |
| 306 | 08423837 | mc power cable | 1 | — |
| 308 | 08423860 | chair control cable | 1 | — |
| 310 | 08423894 | chair seat power cable | 1 | — |
| 311 | 08423902 | pc ethernet cable | 2 | — |
| 312 | 08423910 | power cable | 1 | — |
| 314 | 08423944 | pc platform cable | 1 | — |
| 316 | 08423977 | tilt control cable | 1 | — |
| 318 | 08722105 | horizontal drive | 1 | — |
| 320 | 08722121 | igus cable chain link (one link onl | 1 | — |
| 321 | 08722139 | bracket for igus cable chain (male) | 1 | — |
| 322 | 08722147 | ground cable 80cm | 1 | — |
| 329 | 10182945 | Arm Rotate Gear | 1 | — |
| 330 | 10182951 | Gantry bearings detector side | 1 | — |
| 331 | 10182952 | Gantry bearings tower door side | 1 | — |
| 332 | 10182953 | Floor Anchor (ONE anchor) - c.cam | 1 | — |
| 335 | 10521137 | Detector cable hub instructions - c | 1 | — |
| 336 | 08735438 | Tower Collision Strip for ACC | 1 | — |
| 337 | 08419249 | TILT CONTROL BUTTONS (A/C CHAIR) | 1 | — |
| 339 | 10275538 | Chair frame - c.cam-9VIR1180 | 1 | — |
| 341 | 10412605 | Power cable elect. plug -c.cam | 1 | — |
| 342 | 10275562 | INTERMEDIATE GEAR - c.cam | 1 | — |
| 343 | 10521121 | Hardware kit - Chair back- c.cam | 1 | — |
| 344 | 10521122 | Hardware kit - Chair seat - c.cam | 1 | — |
| 351 | 10607388 | CYCLO GEAR REPLACEMENT KIT-C.CAM | 1 | — |
Working on this equipment?
The part number above is free. A FSELIB subscription adds what you need to actually do the job on Gantry:
- Exploded-view diagrams with clickable hotspots — find the part on the drawing instead of guessing.
- Service manuals for the system this part belongs to — removal, installation and calibration procedures.
- Error codes with meaning, severity and the subsystem that reports them.