GE Healthcare · X-ray VascularAdvantx
Advantx 4A66 POWER INJECTOR ERROR Injector did not inject as programmed.
Symptom
Advantx 4A66 POWER INJECTOR ERROR Injector did not inject as programmed. A timer is set for a delayed injection Advantx 4A66 POWER INJECTOR ERROR Injector did not inject as programmed. Xray run is aborted.
Error message
Advantx 4A66 Injector did not inject as programmed. A timer is set for a delayed injection Advantx 4A66 Injector did not inject as programmed. The injector does not appear to be injecting after being commanded to. A timer is set for a delayed injection and after the delay the injector INJECTING signal is checked to see if the injection is actually occurring. The error is reported if it is not.
Applies to
- Models
- Advantx
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject