GE Healthcare · X-ray VascularAdvantx2287635
Advantx-E VIC or POS Diagnostics (Diags) failure with the new Generic CPU/BIU board (2287635-2).
Symptom
Advantx-E VIC or POS Diagnostics (Diags) failure with the new Generic CPU/BIU board (2287635-2). Advantx-E Diag's fail with the new Generic CPU/BIU board (2287635-2). See long description... Advantx-E VIC or POS Diagnostics (Diags) failure with the new Generic CPU/BIU board (2287635-2). This board is used in new system releases (Clarity), and as a replacement for the IB (Installed Base) CPU-BIU board, part# 46-321384G3/G4. The new Generic CPU-BIU board is only used in Advantx-E Fiber Optic Arcnet systems...
Error message
"8085 - Node Offline" error when attempting VIC or POS Diagnostics. Running any System Level Diagnostic on this board in a module will result in a "Node Offline" error. See long description... " 8085 - Node Offline " error when attempting VIC or POS Diagnostics. Running any SLD's (System Level Diagnostics) on the Advantx-E VIC module, results in an "8085 - Node Offline" error, when a Generic CPU-BIU board (p/n 2287635-2) is installed in the module. The same scenario applies to the POS module with this board installed...
Applies to
- Models
- Advantx
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems Advantx, LFX Advantx product line LFX Advantx product line Advantx E Biplane Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane) Advantx E biplane systems: LCLP+ (22 cm II), LCN+ (32 cm II), LCALP+ (40 cm frontal plane, 32 cm lateral plane)
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject