GE Healthcare · X-ray VascularAdvantx
DLX will not boot, never gets to login prompt. stops booting about 1/2 way thru. stops at 'swap on sd0b fstype spec size…
DLX will not boot, never gets to login prompt. stops booting about 1/2 way thru. stops at 'swap on sd0b fstype spec size. and dump on sd0b fstype spec size...
Symptom
DLX will not boot, never gets to login prompt. stops booting about 1/2 way thru. stops at 'swap on sd0b fstype spec size. and dump on sd0b fstype spec size...
Error message
DLX boots with warning TOD clock not initialized. Does not get to the DLX Login
Applies to
- Models
- Advantx
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject