GE Healthcare · X-ray VascularAdvantx012935
ADX, advantx no gantry operation
Symptom
4AF0: ADX, advantx no gantry operation. 4AF0: ADX, advantx no gantry operation
Error message
ADX LC SC error 53 or errors 50 51 52 53 54 55 56 or 57 Solution ID: XR-SOLUTION-012935 Title:ADX LC SC error 53 or errors 50, 51, 52, 53, 54, 55, 56, or 57 Modality: XR Model Type: Gantry Vasc/Cardiac, LC Problem Description: Gantry electronics boot with one of the above 50 series errors and with a communication code 0300. The affected axis will not drive. Advantx reports error 4AF0 with hardware code 0000, 0001, 0002, 0003, 0004, 0005, 0006, or 0007 with user code n3nn. Where n is any other number. Solution Description: Serial link t
Applies to
- Models
- Advantx
- Product
- Advantx, LFX Advantx product line LFX Advantx product line
- Software
- All AdvantxE Software releases All AdvantxE Software releases All Advantx E Software releases
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject