GE Healthcare · MROvation22522321093421090
Low signal on Head coil. 1000V bias voltage not present.
Symptom
Low signal on Head coil. 1000V bias voltage not present. Unable to run head calibrations. Running software MFO OPENMR4.292a_M4_0433.f. Site could not get much signal from the head coil, all others ok. Could not proceed to calibrate the system. The signal was being coupled away by XMIT coil. T/R switching signals OK and 1000 volts was available but not for head scanning.
Error message
2252232 SCP detected a Node Reset on the CAN network Reset Node is Drivers Control Board 1093421090 2 1 Wed Aug 25 08:04:50 2004 2252232 2 MR-OC0 NSP SCP:CanLinkHWO 595 SCP detected a Node Reset on the CAN network. Reset Node is Drivers Control Board. EN 183 SR 209
Applies to
- Models
- Ovation
- Product
- Ovation with EXCITE
- Software
- OPENMR4-MFO4 Applies to Ovation4 (Excite) only. Ovation4 (MFO4) is 11.x based software.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.