GE Healthcare · MROvation
Clarify 031484 OVATION Laser Alignment Lights Do not Adjust Properly
Symptom
Sagittal alignment light does not run down the center of the cradle The sagittal alignment light does not run down the center of the cradle at all three-table positions on Ovation. The alignment light jig was used and all lasers lay perfectly on the lines. Axial lasers are fine.
Applies to
- Models
- Ovation
- Product
- Ovation/MFO
- Software
- MFO2 Ovation2 with Octane2
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.