Unable to scan due to Power Monitor faults on MFO4.

Symptom

Error message

2248786 RF Interface (RFI) High Voltage Relay Fault Thu Jul 21 11:54:42 2005 Error: 2248786 Host: MR7 Process: NSP File: SCP:../RfNbMdsHWO.cpp Line: 2396 RF Interface (RFI) High Voltage Relay Fault. Possible causes: RF Monitor Cable to System Support Module (SSM) is disconnected or defective. Note: This fault may occur in conjunction with a Power Monitor Fault or when power cycling the SSM.->

2248785 Power Monitor 2 Fault. Thu Jul 21 11:54:41 2005 Error: 2248785 Host: MR7 Process: NSP File: SCPmMdsHWO Line: 1023 Power Monitor 2 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. amplitude: 37 pulse width: 07 duty cycle: 05 Fault in head amplitude. If you need to confirm the source of the fault, reset the power monitor and repeat the scan. This could also occur when power cycling SSM.

2248784 Power Monitor 1 Fault. Thu Jul 21 11:54:41 2005 Error: 2248784 Host: MR7 Process: NSP File: SCPmMdsHWO Line: 1023 Power Monitor 1 Fault. RF Transmit power has reached safety limit allowed for scan parameters and patient weight. Check patient weight entered. amplitude: 37 pulse width: 07 duty cycle: 05 Fault in head am

Applies to

Models

Ovation

Product

Ovation with EXCITE

Area

MR

Related GE Healthcare MR issues

• CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
• CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
• CWA How to Change Exam Number from Remote Tools.
• Known Software issue with 15M4B coding error.
• Unable to Send Images to the PACS Due to PACS is down.
• U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.