GE Healthcare · MROvation
MFO 4 weak head signal, 1000V bias voltage not present, unable to run head calibrations.
Symptom
Low signal on Head coil. 1000V bias voltage not present. Unable to run head calibrations. Running software MFO OPENMR4.292a_M4_0433.f. Site could not get much signal from the head coil, all others ok. Could not proceed to calibrate the system. The signal was being coupled away by XMIT coil. T/R switching signals OK and 1000 volts was available but not for head scanning.
Applies to
- Models
- Ovation
- Product
- Ovation with EXCITE
- Software
- OPENMR4-MFO4 Applies to Ovation4 (Excite) only. Ovation4 (MFO4) is 11.x based software.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100060 Unable To Film.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.
- Having Difficulties Setting Up Gradcal Scan From Dir 5112585 - Signa Ovation With Excite Technology
- CWA ID101091. Some or All Images in the Last Scan Did Not Reconstruct.
- HFO Cradle Will Not Move Due To Loss Of Home Flag Position.