GE Healthcare · MROptima2268843
Unable to scan with error 2268843 or 2268844 due to gradient or RF noise during scanning.
Symptom
Unable to scan with IBC temperature faults.
Error message
2268843 Gradient coil IBC inlet temperature delta is above the warning limit. Future scanning will be inhibited, until temperatures are back in range. See Long Description 2268843 CMR3T NSP SCP:SriCanHWO 2030 Exception Class: Unknown Severity: Unknown Function: Patient Handling: Control/Display PSD: FSE-XL Coil: 8US TORSOPA Scan: 15/7 Gradient coil IBC inlet temperature delta is above the warning limit. Future scanning will be inhibited, until temperatures are back in range. Temperature Delta: 3 degrees C Warning Limit: 3 degrees C-> Extended Error : The gradient coil has inner bore coolant (IBC) temperature sensors these sensors are on the outside of the gradient coil and are intended to measure the temperature of the coolant in the coil. A difference between these readings indicates that the coolant flow is likely blocked in the gradient coil or in the manifold.
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Component
- 5160929-2 SRI4 with Remote Intercom Board 3, U SRI4 with mounting for 450w
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.