GE Healthcare · MROptima
ICN configuration fails with DHCP request due to defective SUN ICN.
Symptom
ICN VRE configuration fails
Error message
ERROR DHCP address requests failed.Only received 0 of 1 DHCP requests after OS install. Error found in /usr/local/bin/install/log/VRE_Install.log during Sun ICN VRE configuration.ERROR DHCP address requests failed.Only received 0 of 1 DHCP requests after OS install. Please check ethernet cables, reseat connections and retry VRE configuration
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Component
- 5127452-6 ICN IMAGE COMPUTE NODE
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- CWA ID103582. Unable To Scan With Driver Module Errors.
- CWA ID104077. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- IApplication Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.
- CWA ID107471. Unable to Download or Reset The TPS MGD or ISE.