GE Healthcare · MROptima226743014033463859806186385065863850
The Center Frequency Was Out of Specified Range when Set Manually in Manual Prescan and Saved.
Symptom
Auto and Manual Prescan Fails
Error message
2267430 Bad Center Frequency Requested. The DTX-0 module was commanded to a center freq of XXXXXXXX Hz 2267430 Host: MR450 Process: diagCoord File: IrfRmtDev.cpp Line: 824 Task ID: 0x4cadc30 Time: 140334 Object: AGP Exception Class: Notification Function: Software/Firmware/Config: N/A Bad Center Frequency Requested.The DTX-0 module was commanded to a center freq of 6385980 Hz. The module is limited to 61863850 to 65863850 Hz. This is a software error.->
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- CWA ID103582. Unable To Scan With Driver Module Errors.
- CWA ID104077. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- IApplication Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.
- CWA ID107471. Unable to Download or Reset The TPS MGD or ISE.