GE Healthcare · MROptima
Magnet Serial Number Wrong in Guided Install.The LVShim is Out of Spec After Passing During Passive Shim Calibration.Cor…
Magnet Serial Number Wrong in Guided Install.The LVShim is Out of Spec After Passing During Passive Shim Calibration.Correct Magnet Serial Number in Guided Install Hardware Configure Tab.
Symptom
The LVShim is Out of Spec After Passing During Passive Shim Calibration on First Installation Calibration. The FE was performing LV SHIM after the passive shim program had passed. Z6 harmonic was calculated to be 157 (spec limit is
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA How to Change Date or Time on LX, Excite, HD, HDe, HDx, HDxT, HFO, Excite HFO, Ovation1-4, Profile1-5, Discovery MR450 MR750 and Optima 450w Systems.
- CWA No Power to the Table and Magnet Display, Table Will Not Move And No Lights On the Magnet.
- CWA How to Change Exam Number from Remote Tools.
- Known Software issue with 15M4B coding error.
- Unable to Send Images to the PACS Due to PACS is down.
- U41 of the Slave RF Ctrl Assy, part of the PSU in the SRFD2 RF Amplifier Failed.