GE Healthcare · MROptima
Daily QA test failed with ghosting or ASR Troubleshooting Steps
Symptom
Daily QA Failed The Daily QA should be run every day using the 180mm coil with the Daily QA 1 liter bottle.
Error message
The Daily QA test failed. Please check for proper phantom positioning and proper system setup and run again. If the problem cannot be corrected, contact Service and report the error. Further clinical scanning is not recommended until the error condition is corrected.
Applies to
- Models
- Optima
- Product
- SpecialtyMR Optima MR430s Use only with 3.53 SpecialtyMR software version
- Software
- SpecialtyMR 3.53 Use with 1.5T Extreme MSK AA5000 and Optima MR430s SpecialtyMR products
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- CWA ID103582. Unable To Scan With Driver Module Errors.
- CWA ID104077. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- IApplication Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.
- CWA ID107471. Unable to Download or Reset The TPS MGD or ISE.