GE Healthcare · MROptima2268844
Error 2268844 due to defective IBC sensor.
Symptom
Unable to scan with IBC temperature faults.
Error message
2268844 Gradient coil IBC inlet temperature is above the fault limit. Current and future scanning will be inhibited, until temperatures are back in range. Temperature Delta: 18 Fault Limit: 4-> 2268844Gradient coil IBC inlet temperature is above the fault limit.Current and future scanning will be inhibited, until temperaturesare back in range.Temperature Delta: %dFault Limit: %d Extended Error: The gradient coil has inner bore coolant (IBC) temperature sensorsthese sensors are on the outside of the gradient coil and are intended tomeasure the temperature of the coolant in the coil. A difference betweenthese readings indicates that the coolant flow is likely blocked in thegradient coil or in the manifold.
Applies to
- Models
- Optima
- Product
- Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
- Software
- DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100513. Will Not Scan with Gradient Errors.
- CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- CWA ID103582. Unable To Scan With Driver Module Errors.
- CWA ID104077. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
- IApplication Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.
- CWA ID107471. Unable to Download or Reset The TPS MGD or ISE.