GE Healthcare · X-ray VascularAdvantx
Advantx-E Error 4B07 HW0101 indicates that a command has been detected on Smarthandle A Lever for more than 1…
Advantx-E Error 4B07 HW0101 indicates that a command has been detected on Smarthandle A Lever for more than 1 minute without pressing the Enable Switch.
Symptom
Advantx-E Error 4B07 HW0101 indicates that a command has been detected on Smarthandle A Lever for more than 1 minute without pressing the Enable Switch.
Error message
ADX: 4B07 Smart Handle Problem Call Service . ADX: 4B07 Smart Handle Problem Call Service May have HW HW:0101. ADX: 4B07 Smart Handle Problem Call Service HW:0101. Description: A permanent command is detected on one axis of the smart handle A or B. The actual error is described by means of the HW status word. When multiple errors occur nearly simultaneously, two or more of these status words will be logically “OR–ed” together to form a single error condition identifier. HW 0101 = Smart Handle A side lever
Applies to
- Models
- Advantx
- Product
- Advantx E Monoplane Advantx E Systems advantx e, vamp Advantx E generator Systems
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject