GE Healthcare · MROptima2273003

Coil id not recognized intermittently due to Coil Cable.

Symptom

Coil ID not recognized intermittently. Only one coil is affected.

Error message

2273003 Coil validation error. An incorrect CRC was detected in the coil ID data from the coil. The coil is programmed incorrectly. See Long Desc. 2273003 Coil validation error. An incorrect CRC was detected in the coil ID data from the coil. The coil is programmed incorrectly. Connector: %b Extended Error: If this happens whenever the coil is plugged in, this is most likely a bad coil. If not, this could indicate a bad connection at the coil interface, a bad coil, bad cables to the RF Hub RFCB, or a bad RFCB. Try connecting another coil. Run the Coil ID Diagnostic or Coil Datapath Diagnostic to troubleshoot cabling issues and to isolate the coil interface from the coil.

Applies to

Models
Optima
Product
Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
Software
DV22.0 For the Discovery MR750, MR450 or Optima MR450w products only. For the Discovery MR750, MR450 or Optima MR450w products only.
Component
2416710 SYSTEM CABLE, 1.5T CARDIAC Part #: 2416710Part Type: GP CONSUMABLES Part Weight: 0.00 LBRRepairable: NoReturnable: NoHazardous Material: NDescription: FRU SYSTEM CABLE, 1.5T CARDIACFRU: YesStatus: Orderable
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues