GE Healthcare · MROvation
LPCA is Configured in Guided Install Hardware for OvationHD.
Symptom
LPCA is Configured in Guided Install Hardware for OvationHD. Sometimes, in ‘Guided Install Hardware Tab’ the ‘LPCA Configuration Type’ field is disabled and shown in red. The operator cannot do a ‘configure system’ function. Ovation does not use LPCA. Forward production Ovation HD is configured for an LPCA under the Guided Install Hardware tab.This field is greyed out and in red prohibiting any change.
Applies to
- Models
- Ovation
- Product
- Ovation with EXCITE
- Software
- OvationHD Applies to OvationHD_M3 and/or OvationHD_ M4. OvationHD is 14.x based software running a single ICN. This is not the same as Ovation5.
- Area
- MR
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare MR issues
- CWA ID100060 Unable To Film.
- CWA ID100315. Auto and Manual Prescan Fails.
- What is the Acoustic Noise Level in the Ovation Magnet.
- Having Difficulties Setting Up Gradcal Scan From Dir 5112585 - Signa Ovation With Excite Technology
- CWA ID101091. Some or All Images in the Last Scan Did Not Reconstruct.
- HFO Cradle Will Not Move Due To Loss Of Home Flag Position.