GE Healthcare · X-ray VascularAdvantx421000
DLX application cannot be started. "Unrecoverable Hardware Error" is displayed.
Symptom
DLX application cannot be started. "Unrecoverable Hardware Error" is displayed.
Error message
DLX error code 421000 IDA_ERR_SCSI_C DLX error code 421000 IDA_ERR_SCSI_C. DLX error code 421000 IDA_ERR_SCSI_C mnemonic: IDA_ERR_SCSI_C category: Misc_error severity: Critical label : A VDP SCSI error has occurred. CAUSE : During SCSI access an error has occurred.
Applies to
- Models
- Advantx
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Component
- DLX: 2128119 HARD DISK DRIVE SEAGATE OR FUJITSU DLX: 2128119 HARD DISK DRIVE SEAGATE OR FUJITSU DLX: 2128119 HARD DISK DRIVE SEAGATE OR FUJITSU
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject