2267863 The X axis XGA is reporting a I_Coil Wire Fault due to XGA amplifier.

Symptom

Error message

2267863 The %axis XGA is reporting a I_Coil Wire Fault See Long Description Extended Error: The cables between the coil current sensor and the SB board is loose or has fallen off. Ensure cables J5 and J6 of the XGA are connected to the corresponding axis current sensor at the top of the Power Cabinet.

2267950 The Z-Axis XGA is reporting a FPGA fault. See Long Description Error: 2267950 Host: BUMMRMRM003 Process: NSP File: SCP:FspMac.cpp Line: 320 Exception Class: Unknown Severity: Unknown Function: Gradient: N/A PSD: Unknown Coil: Unknown Scan: -1/-1 The Z-Axis XGA is reporting a FPGA fault.-> Extended Error : Ensure that the Octavius (Ethernet type) cable is connected to the XGA. Observe that the XGA heart-beat LED is flashing. If the heart-beat LED is not flashing ensure that the 48V cable is plugged in. If power is connected and no heart-beat replace the XGA.

Applies to

Models

Optima

Product

Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.

Software

21.0 Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750). Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750).

Component

5184566-2 XGD AMPLIFIER 5184566-2 XGD AMPLIFIER

Area

MR

Related GE Healthcare MR issues

• CWA ID100513. Will Not Scan with Gradient Errors.
• CWA ID103384. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
• CWA ID103582. Unable To Scan With Driver Module Errors.
• CWA ID104077. Computer Will Not Boot with the message on the screen that says Do Not Interact With System.
• IApplication Software does not complete the boot process with TPS Download failure Due to Idle Overnight With Power On.
• CWA ID107471. Unable to Download or Reset The TPS MGD or ISE.