GE Healthcare · MROptima22757083126066022678492267425139512269076

Fails TPS Reset when booting up to Applications or when Resetting TPS.

Symptom

Intermittent SRPS shutdown during scanning

Error message

2275708 The RF Hub failed to recover CAN communication on wakeup. The RRX is reporting that RF Hub power is OK and clock is on. See Long Description Error: 2275708 Host: C-3TMRI2 Process: diagCoord File: RfHubCanHWO Line: 5792 Diagnostic: CFB Board Level Diagnostics Iteration: 1 of infinite Action: 1 Task ID: 0x2537bb0 Time: 31260660 Object: SCP Function: RF: RF Receive Communication Failure. The RF Hub failed to recover CAN communication on wakeup. The RRX is reporting that RF Hub power is OK and clock is on. Check RF Hub CAN cable connections.->

2267849 The GMC is reporting a clock stop condition 2009 Error: 2267849 Host: LIBR-MR1 Process: NSP File: SCP:FspMac.cpp Line: 320 Exception Class: Unknown Severity: Unknown The GMC is reporting a clock stop condition Extended Error: Check that the system clock is plugged into the GMC.

2267425 No Clock Signal to IRF3 board. Error: 2267425 Host: WIMRMR2 Process: diagCoord File: Irf3.cpp Line: 1402 Task ID: 0x493f6b0 Time: 13951 Object: AGP Exception Class: Notification Function: Software/Firmware/Config: N/A No Clock Signal to IRF3 board. The IRF3 board did not detect a clock signal on the J8 fiber optic clock cable. This condition will

Applies to

Models
Optima
Product
Optima MR450W Wide bore magnet. Not Discovery750 or Discovery450.
Software
21.0 Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750). Only for Optima MR450W (wide bore) systems. (Not to be used on Discovery MR450 or Discovery MR750).
Area
MR

Full cause & step-by-step resolution

The complete cause analysis, the step-by-step remedy for this GE Healthcare MR issue are available to FSELIB subscribers — re-authored, web-first, searchable.

Start free trialSign in

7-day free trial · no credit card required

Related GE Healthcare MR issues