GE Healthcare · X-ray VascularAdvantx
No communication between SUN workstation and VDP at DLX application start up.
Symptom
No communication between SUN workstation and VDP at DLX application start up. After DLX power up, DLX login prompt is displayed on the flat panel. Communication error is then displayed on the flat panel when starting DLX application (ie log in as DLX). There is no communication between SUN workstation and VDP and DLX browser does not show up on the DLX flat panel.
Error message
"Check DLX Cabinet Power" error message displayed on Flat screen "Check DLX Cabinet Power" error message displayed on Flat screen. Communication problem between SUN and VDP at DLX application start up (i.e after typing DLX at DLX login prompt).
Applies to
- Models
- Advantx
- Product
- DLX 3 DLX 3 digital system DLX 3 digital system
- Software
- DLX C17.14 DGW Sw. Jumpstart Software JumpStart Apps Apps Version Rev Kit Floppy CD Solaris Floppies ----------- ----------- ---------- ---------- --------- --------- --------- 2.09 2.2 2276527 2237467 2276529 2211863 2276528
- Area
- X-ray Vascular
Full cause & step-by-step resolution
The complete cause analysis, the step-by-step remedy and the attached service documents for this GE Healthcare X-ray Vascular issue are available to FSELIB subscribers — re-authored, web-first, searchable.
7-day free trial · no credit card required
Related GE Healthcare X-ray Vascular issues
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Intermittent Gantry Lockup usually occurred when bagging the Detector or Removing the patient from the table.
- Xray aborted - Restart Xray; if problem persists, call Service is displayed on the Innova Image monitor.
- Omega, Can not move the table top in the lateral direction.
- The Advantx Console is Blank on boot of the system.
- Exabyte won't archive or eject